The STABILITY CHAMBER maintains adequate temperature and humidity and checks the behavior of the product under different conditions. The chamber supports products to see their response to different climatic conditions and helps scientists to determine the causes for change under altering environmental exposure.
| Parameter | Temperature | Humidity |
|---|---|---|
| Range | 10ºC to 60ºC | 40%RH to 90%RH |
| Accuracy | ±0.2ºC | ±2.0 % |
STANDARD EQUIPMENT FEATURES :
-
Standard Models: Inside S.S. 304 with Mirror Polish & Outside Mild Steel Powder Coated
-
GMP Models: Inside S.S. 304 with Mirror Polish & Outside Stainless Steel 304 with Dull Buff Finish
-
Inner Full Viewing Glass Door and Outer Door Insulated with Lock and Key Arrangement
-
Silicon Sponge Rubber Gasket Sealing for Inner and Outer Doors
-
Double Walled PUF Insulation 70 MM Modular Panel
-
PID-Based Controller
-
High-Quality Temperature and Humidity Sensors
-
Hermetically Sealed Compressor Charged with CFC-Free Refrigerant, Complete with Air-Cooled Condenser
-
Boiler Tank Made of Stainless Steel
-
Long-Lasting Stainless Steel (S.S.) Tubular Fin Type Heating Elements
-
Forced Air Circulation for Uniform Temperature & Humidity
-
Perforated/Mesh Type Stainless Steel (SS 304)
-
PU Castor Wheels for Easy Mobility
-
Interior Illumination for Working Area
-
Safety Devices: Low Temperature Cut-Off Settable Thermostats
-
Audio/Visual Alarms for Deviations
-
Mains Supply: 230V AC, 50Hz Single Phase
-
IQ, OQ, PQ & SOP Along with Traceability
SAFETY FEATURES :
-
Redundant High-Temperature Safety System with Alarm & Safety Thermostat
-
Automatically Cuts Off Power to Heaters if Temperature Exceeds 70°C
-
Inbuilt Overload Protection Relay for Compressor
-
Compressor ON Delay Timer to Safeguard the Compressor
OPTIONAL ACCESSORIES :
-
Standby Refrigeration System (Except for 90 Liters)
-
Electronic Digital Timer Range from 0 to 999 Minutes
-
PC / Printer Interface
-
Scanner with 4-Point Temperature Sensors and Printer Interface
-
Servo Controlled Voltage Stabilizer
-
21 CFR Part 11 Compliant Software
ORDERING INFORMATION FOR STD / GMP MODELS :
| CAT. NO. | Capacity (Ltrs.) | Internal Dimensions W x D x H (cm) | Cu Ft. | No of Trays | |
|---|---|---|---|---|---|
| SC/MS 0090 | SC/SS 0090 | 90 | 45 x 45 x 45 | 3 | 2 |
| SC/MS 0120 | SC/SS 0120 | 120 | 45 x 45 x 60 | 4 | 2 |
| SC/MS 0150 | SC/SS 0150 | 150 | 50 x 50 x 60 | 5 | 3 |
| SC/MS 0175 | SC/SS 0175 | 175 | 50 x 50 x 70 | 6 | 3 |
| SC/MS 0200 | SC/SS 0200 | 200 | 60 x 60 x 60 | 7 | 3 |
| SC/MS 0227 | SC/SS 0227 | 227 | 60 x 63 x 60 | 8 | 3 |
| SC/MS 0270 | SC/SS 0270 | 270 | 55 x 55 x 90 | 9 | 3 |
| SC/MS 0324 | SC/SS 0324 | 324 | 60 x 60 x 90 | 12 | 3 |
| SC/MS 0400 | SC/SS 0400 | 400 | 60 x 63 x 106 | 14 | 4 |
| SC/MS 0450 | SC/SS 0450 | 450 | 60 x 60 x 125 | 16 | 4 |
| SC/MS 0500 | SC/SS 0500 | 500 | 60 x 63 x 132 | 18 | 4 |
| SC/MS 0550 | SC/SS 0550 | 550 | 65 x 65 x 130 | 20 | 4 |
| SC/MS 0600 | SC/SS 0600 | 600 | 80 x 80 x 95 | 24 | 4 |
| SC/MS 0800 | SC/SS 0800 | 800 | 80 x 80 x 125 | 28 | 4 |
| SC/MS 1000 | SC/SS 1000 | 1000 | 80 x 80 x 157 | 35 | 5 |