FOLLOWING STEPS TO BE FOLLOWED FOR MAINTAING THE ADEQUATE TEMPERATURE RESULTS.
FOR “PLANT GROWTH CHAMBER” :
-
Operating room temperature (ambient) conditions for your 0 0 PLANT GROWTH CHAMBER should be between 18 C to 25 C
-
Temperature Uniformity: After setting the chamber temperature, wait at least 1 hour for the chamber temperature to stabilize to ambient conditions. To achieve maximum temperature stability.
TECHNICAL SPECIFICATION :
| Name of the Equipment | Plant Growth Chamber |
|---|---|
| Display | Digital PID Temperature Controller |
| Temperature Range |
10°C to 60°C (With Light ON) 5°C to 60°C (With Light OFF) |
| Temperature Accuracy | ± 0.2°C |
| Humidity Range | 40% to 98% |
| Humidity Accuracy | ± 2% |
| Illumination (LUX) | Up to 20000 |
| Construction |
Inner Chamber: Stainless Steel 304 with Mirror Finish Outer Chamber: Mild Steel Powder Coated Double-wall construction with PUF insulation |
| Advantage | Energy saving, low power and water consumption |
| Air Circulation | Motor and blower arrangement to ensure uniformity under loaded condition |
| Alarm |
Temperature Deviation Alarm Humidity Deviation Alarm Water Level Alarm Compressor Failure Alarm Steam Generator Failure Alarm Door Open Alarm |
| Trays | Stainless Steel Plant Growth Trays |
| Florescent Light | Cool White Fluorescent Light |
| Insulation | 75mm Thick CFC free PUF Insulation. |
| Heating System | U shaped S.S. Nichrome wire air heaters. |
| Illumination | Illumination 50000 Lux |
| Tray Distance | Light to trays distances 1 feet each tray |
| Observation Door | Inside see through glass door |
| Refrigeration System |
Hermetically Sealed CFC Free Emerson Compressor with R 134a refrigerant having
state of art bypass system for continuous run of compressor. Make: Emerson |
| Humidity System | Steam injection system with water level arrangement with insulation to save heat energy. |
| Power | Works on 230 V AC Single phase 50Hz |
ORDERING INFORMATION FOR STD / GMP MODELS :
| CAT. NO. & MODEL | Capacity (Ltrs) | Internal Dimension (WxDxH in CM) | External Dimension (WxDxH in CM) | Inner / Outer Body Material | No. of Trays | |
|---|---|---|---|---|---|---|
| PGC/MS STD - 100 | PGC/MS GMP - 100 | 100 | 43 x 40 x 60 | 58 x 72 x 129 | SS 304 / MS | 2 |
| PGC/MS STD - 200 | PGC/MS GMP - 200 | 200 | 50 x 40 x 100 | 65 x 72 x 169 | SS 304 / MS | 3 |
| PGC/MS STD - 300 | PGC/MS GMP - 300 | 300 | 56 x 45 x 120 | 71 x 77 x 189 | SS 304 / MS | 4 |
| PGC/MS STD - 400 | PGC/MS GMP - 400 | 400 | 63 x 53 x 120 | 78 x 85 x 189 | SS 304 / MS | 4 |
| PGC/MS STD - 600 | PGC/MS GMP - 600 | 600 | 72 x 65 x 130 | 87 x 97 x 192 | SS 304 / MS | 4 |
| PGC/MS STD - 800 | PGC/MS GMP - 800 | 800 | 112 x 60 x 120 | 137 x 92 x 192 | SS 304 / MS | 8 |
| PGC/MS STD - 1000 | PGC/MS GMP - 1000 | 1000 | 115 x 67 x 130 | 140 x 99 x 192 | SS 304 / MS | 8 |