B.O.D. INCUBATORS are designed primarily to meet the requirements for tests of Biological Oxygen Demand / Biochemical Oxygen Demand and are equipped for controlled incubation and preservation of sensitive samples/cultures, microorganism cultures, vaccines & serum incubation etc. These Incubators are designed to meet the testing challenges of the competitive pharmaceutical research field and enhance the scientific efforts of educational institutions and organizations.
SALIENT FEATURES & TECHNICAL SPECIFICATIONS :
-
Double-walled construction with backside triple, having Stainless Steel – 304 Grade & Exterior Mild Steel with powder coat finish (STD Model) / Exterior Fully Stainless Steel with Dull Matt finish (GMP Model).
-
Castor wheels for easy movability.
-
Units are highly insulated by thick PUF insulation between the walls.
-
A key lockable insulated door having magnetic gasket seals door gaps perfectly.
-
A transparent full-length Acrylic inner door is provided to have a clear inner view of the samples/specimens put in, without disturbing the thermal conditions inside the incubator.
-
Illumination lamp fitted for clear visibility.
-
Mechanical convection system (Motorized Blower) ensures even air distribution within the chamber.
-
Heating by long-life 'U' type S.S. tubular heaters.
-
Cooling is done by CFC-free Hermetically sealed Emerson Copland make compressors utilizing R-134A, an eco-friendly refrigerant.
-
Adjustable & removable SS rod-type shelves.
-
The Control Unit comprises a PLC-based system with Touch-Screen HMI / Dual Display Microprocessor-based PID Temp. Controllers with PT – 100 sensor.
-
Temperature Range : 5 °C to 60 °C, Accuracy : ± 1. 0 °C
-
Operates on 230 Volts AC Single phase 50 Hz.
SPECIAL FEATURES :
-
Redundant high temperature safety system with Alarm & safety Thermostat automatically cuts - off power to heaters if temperature exceeds 70 °C
-
Inbuilt Overload protection relay for compressor
-
Compressor ON delay timer, to safe guard the compressor.
OPTIONAL ACCESSORIES :
-
Standby refrigeration system (Except for 90 Liters).
-
Electronic Digital Timer Range from 0 to 999 Minutes.
-
PC / Printer Interface.
-
Scanner with 4-point temperature sensors and printer interface.
-
Servo Controlled Voltage Stabilizer.
-
21 CFR Part 11 compliant software.
ORDERING INFORMATION FOR STD MODELS :
| CAT. NO. | Capacity (Ltrs. / Cu Ft.) | Internal Dimensions W x D x H (CM) |
|---|---|---|
| BOD/MS 0004 | 120 / 04 | 45 x 45 x 60 |
| BOD/MS 0008 | 200 / 08 | 60 x 60 x 60 |
| BOD/MS 0012 | 324 / 12 | 60 x 60 x 60 |
| BOD/MS 0016 | 450 / 16 | 60 x 60 x 125 |
| BOD/MS 0035 | 1000 / 35 | 80 x 100 x 125 |
ORDERING INFORMATION FOR GMP MODELS :
| CAT. NO. | Capacity (Ltrs. / Cu Ft.) | Internal Dimensions W x D x H (CM) |
|---|---|---|
| BOD/SS 0004 | 120 / 04 | 45 x 45 x 60 |
| BOD/SS 0008 | 200 / 08 | 60 x 60 x 60 |
| BOD/SS 0012 | 324 / 12 | 60 x 60 x 60 |
| BOD/SS 0016 | 450 / 16 | 60 x 60 x 125 |
| BOD/SS 0035 | 1000 / 35 | 80 x 100 x 125 |