In order to provide optimal conditions for cell growth, some type of agitation or shaking is necessary to incorporate oxygen and evenly distribute nutrients throughout the culture media. That's often done by placing a separate shaker inside an incubator, but incubator shakers combine those functions for a more convenient and efficient setup. The incubator shaker can be used for growth of just about any kind of cell including bacterial cultures, tissue cultures, and yeast
SPECIFICATIONS :
-
Outer Construction: MS Powder Coated
-
Inner Construction: Stainless Steel (SS 304)
-
Insulation: 70mm Thick PUF Insulation Between Walls
-
Refrigeration: CFC-Free Compressor Utilizing R134a Eco-Friendly Refrigerant
-
Samples Viewing: Transparent Glass Window (1 ft²) on Front Door
-
Inbuilt Lighting: LED Light with External Switch on the Front Panel
-
Shaking Platform Size: SS Platform 335 x 335 mm | 435 x 435 mm
-
Shaking Speed: 20 – 200 Orbital Strokes per Minute (Without Load)
-
Additional SS Tray: Suitable for Petri Dishes and Small Beakers
-
Temperature Range: 5°C to 60°C (Accuracy: ±1.0°C)
-
Safety Thermostat: Cuts Off Heater Above 70°C
-
Uniformity Control: Recirculation Fan for Temperature Uniformity
-
Platform Capacity: As Per Tray Size and Suitable Clamps Capacity
-
Display Control: Microprocessor-Based PID Controller with PT 100 Sensor
-
Speed Indicator: Digital Speed Indicator on Front Panel
-
Mains Power: Operates on 230V AC, Single Phase, 50Hz
SPECIAL FEATURES FOR 90 LTRS
-
Motor Type: Brushless Induction Motor for 24 Hrs Working Cycle
-
DC Drive: Compatible with BLDC Motor
-
Working Hours: Operates on 24V Brushless DC Motor for Long Running Lab Applications
-
Zero Maintenance.
SPECIAL FEATURES FOR 125 LTRS
-
Motor Type: Brushless 3-Phase Induction Motor for 24 Hrs Working Cycle
-
VFD Drive: Compatible with 3-Phase Induction Motor
-
Working Hours: Operates on 3-Phase Induction Motor for Long Running Lab Applications
-
Zero Maintenance
ORDERING INFORMATION :
| CAT. NO. | Capacity (Ltrs.) | Outer Chamber Size (L x D x HT) in mm | Inner Chamber Size (L x D x HT) in mm | Tray Size (mm) | Digital Speed Indication |
|---|---|---|---|---|---|
| BISR - 090 | 90 | 490 x 605 x 820 | 400 x 400 x 450 | 335 x 335 | YES |
| BISR - 125 | 125 | 650 x 650 x 1300 | 500 x 500 x 500 | 435 x 435 | YES |
NOTE: The 3 KVA Capacity, Servo Controlled Voltage Stabilizer is a must for the above B.O.D. Incubator.
Loaded SS Clamps (removable) for Incubator Shaker: OPTIONAL
| CAT. NO. | Flask Capacity (ml) | No. of SS Lotus Clamps for Tray Size 335 x 335 mm | No. of SS Lotus Clamps for Tray Size 435 x 435 mm |
|---|---|---|---|
| SS CLAMP - 501 | 50 | 16 | 25 |
| SS CLAMP - 502 | 100 | 16 | 25 |
| SS CLAMP - 503 | 250 | 8 | 16 |
| SS CLAMP - 504 | 500 | 8 | 16 |
| SS CLAMP - 505 | 1000 | 4 | 8 |
| SS CLAMP - 506 | 2000 | 1 | 4 |